Half the key is still in your hand. The other half stayed behind in the ignition when it snapped, and now the dash won't light and the wheel won't unlock no matter how carefully you nudge what is left.
Whether the key won't insert, won't turn, turns without engaging anything, or is stuck and refuses to come back out, each version of the symptom points toward a different part of the mechanism. A key that spins loosely usually means something has disconnected inside; a key that won't insert usually means the barrel or the key itself is the obstacle. Naming the exact behaviour on the phone lets the locksmith bring the right tools before ever touching the vehicle.
Sound familiar?East Gwillimbury
Ignition Lock Repair · East Gwillimbury
Scene 1
Behind the part of the ignition a key touches sits an electrical switch with its own positions, off, accessory, on and start, and a mechanical steering lock that engages when the key is removed. The locksmith checks how the barrel behaves at each stop: whether it reaches start cleanly, whether the wheel locks and releases as it should, and whether the transition back to accessory is smooth. A fault confined to one position often narrows the cause before any part comes off the vehicle.
Scene 2
A repaired or replaced cylinder is cycled through every stop, off, accessory, on and start, with the key the owner will actually use afterward. The steering lock is engaged and released several times, the dash is watched for the expected response at each position, and the engine is started and shut off to confirm the whole sequence holds up in practice rather than just on the workbench.
Scene 3
The visit ends with the ignition cycling cleanly from off through accessory, on and start, and back again, with the steering lock engaging and releasing as it should. The locksmith walks through this with you, the engine started and shut off more than once, so you see for yourself that the barrel is answering the key properly and consistently before anyone drives away from the property.
What shapes the quoteBrown Hill Locksmith Specialists
FeesSame any hour
The lock cylinder is mechanical: a key physically turns it through accessory, on and start. The immobilizer and transponder system is electronic: it recognises a chip inside the key before allowing the engine to run. A locksmith services or replaces the physical cylinder; programming a chip to the vehicle's electronic system is separate work that a suitably equipped automotive locksmith, a dealer, or an automotive electrical specialist can handle.
A single worn key is a common starting point after buying used, and the visit usually has two parts: reading the existing wafers so a crisp new key can be cut, and deciding whether the barrel itself needs a service given whatever wear the previous owner's key left behind. Bringing whatever paperwork came with the sale helps confirm ownership before any work begins.
Most ignition lock repair happens wherever the vehicle already is, a driveway, a lot, a curb, since the tools travel well even though the mechanism is reached from inside the vehicle, at the column or instrument panel. A shop becomes necessary when specialized dealer equipment, an electronic diagnosis, parts availability or the mechanical repair itself calls for it.
YorkOntario
Ignition Lock Repair · Brown Hill, Holland Landing, Mount Albert, Queensville, River Drive Park, Sharon
Every square is one home in a hundred.
On-site assessment preferred · (365) 510-2010, open 24/7
